CREATECH FILTER ELEMENT
WELCOME TO VISIT: HTTP://WWW.FILTERELEMENT.NET

Our Products
 
 
Horizon Mercantile Associates Pvt. Ltdpipes and tubes
HomeProducts



Sintered Wire Mesh and Filter Cartridges

Sintered filter elements are single pipe filters made out of five-layer sintered porous metal mesh. It is one standard combination of micron metal mesh fabric for the widest application. Multi-layer metal meshes as filter media are made with normally five layers of metal mesh brought together as per the different combination laminated. They are sintered together through vacuum sinter, compression and rolling and made into a kind of porous material. Major materials: stainless steel fibers.

Basic Specification of Sintered Mesh and Filters:
Material: Standard material is SUS316L (AISI316L).
Pore Size: 5 Micron Nominal,
Filter Material: Sus 304
Fluid: Natural Gas,
Temp: 70-80 ° C.
Results Current Filter: 20 Micron Filter.
Results Expected: 5 Micron.

Features:
·Large filtration range: From 1micron to 100micron it all has the well filtration performance .
·Steady filter rating, As to the two protective layers and sinter arts, the mesh of the filter layer is not easy to change.
·High mechanical strength. Excellent resistance to pressure ang high mechanical strength due to the fourth and fifth layers reinforced.
·Washable: Easy to wash, especially back washing owing to the surface.
 ·Heat resistance. Heat resistant up to 480℃.
·Corrosion resistance. Corrosion resistance as to a result of adopting SUS316L.
 ·Tractability.Suit to cut, punching, warp, tension and jointing.

Size: Standard size are 500×1000mm、600×1200mm, other sizes in the above-mentioned range are also available according to customer's needs.

Sintered Mesh Filters